|
|
WILA NSCLI |
AMADA ONE TOUCH |
WILSON EXPRESS |
|
OPERATION |
Hydraulically operated from a
single point and no external
hoses. Manual unit available which
is clamped by turning a special
screw ¸ turn every 4 inches. |
Manual tool holders with handle
every 6 inches. Hydraulic option
to connect clamping holders with
hoses which are vulnerable. |
Manual tool holders which have
levers every 6 inches. Levers must
be inserted or removed depending
on part accessibility. No
hydraulic clamping offered. |
|
ACCURACY |
Tooling AND tool holder are .0004"
accuracy. |
Tooling accuracy .0008" |
Same as Amada |
|
CLAMPING TOOL LENGTHS |
Every tool length can be clamped
at any position on the ram; there
is a continuous clamp line. |
There is space between each of the
tool holders. Clamping of small
segments could be a problem; it is
not possible to slide small
segments between holders because
they can fall out. |
Same as Amada |
|
APPLICABILITY OF THE CLAMPING
SYSTEM |
Clamping system can be adapted to
every type of press brake. |
Only suitable for European style (Promecam/Amada)
adaption. |
Offer different tool holders for
different styles of press brakes. |
|
VERTICAL TOOL CHANGING |
Tools can be inserted and removed
vertically up to 20" length and up
to 28 lbs weight at any position
on the ram using patented
SAFETY-CLICK. |
With manual clamping, only lengths
that can be held in one hand
because other hand needs to open /
close lever. Hydraulically, max
length is approx 10". |
Manual system. Only lengths that
can be held by one hand. Multiple
small lengths difficult to hold;
longer lengths must be slid out
the end of press brake; one hand
needed to activate lever. |
|
WORKING SPEED |
When clamping is activated, all
tooling is automatically seated,
centered, and aligned within 5
seconds. |
When clamping is activated,
tooling is centered but you need
to bring ram down to align
tooling. |
Same as Amada |
|
REVERSIBILITY |
Adaption is
symmetrical to the centerline of
the press brake; you need only one
clamping to be able to reverse
tooling. |
Adaption is
not symmetrical so if you need to
reverse tooling, dual clamping is
needed (at extra cost). |
Same as Amada |
