|
AMERICAN STYLE CORRUGATION DIE SET |
|
AMERICAN STYLE
CORRUGATION DIE SETS |
 |
C-1 Corrugation Die Set |
|
The C-1 die set
is used to form a shallow open angle hat
channel. The maximum depth cannot exceed
three times the material thickness. |
|
 |
C-2 Corrugation Die Set |
|
The C-2 die set
is used to form a radius rib in a single
stroke. Over bend can be built into the
die set to compensate for spring back.
|
|
 |
C-3 Corrugation Die Set |
|
The C-3 die set is used to form a vee
rib in a single stroke. For heavy gauge
material the die set can be relieved to
reduce tonnage. The part will be flat
after forming but the angel may vary
over the length of the part.
|
|
 |
C-4 Corrugation Die Set |
|
The C-4 die set
is used to form three bends in a single
stroke to stiffen a sheet of material.
The C-4 is commonly used to form a door
jam.
|
|
 |
C-5 Corrugation Die Set |
|
The C-5 die set
is used to form continuous corrugations
in a sheet. After the first operation
the spring loaded pressure pad locates
the sheet and becomes self-gauging.
|
|
 |
C-6 Corrugation Die Set |
|
The C-6 die set
is used to form continuous corrugations
in a sheet. After the first operation
the spring loaded pressure pad locates
the sheet and becomes self-gauging. The
maximum depth cannot exceed three times
the material thickness. |
|
