The graphical CNC control allows operators
to visualize the bend. They have total control of
approach speed, pressing speed
and retract speed,maximizing production time.
Y1/Y2 synchronized hydraulic cylinders give
repeatable bed parallelism to 0.0004".
Standard backgages have twin drive x-axis to
assure repeatability with over 1,000 lbs. of holding
force, and dual z-axis to keep multiple, sequential
bends simple. A six axis option is available.
Other options include:
Hydraulic tool clamping eliminating the need for
shims and reducing set-up time; and crowning system
to assure fast repeatable bends;
Pro2 press brakes are available in multiple size,
tonnage and tooling options.
Pro2 Advantages include:
Synchronous Technology: Designed
for control and precision, the Pro2 uses two
cylinders, electronically synchronized to maintain
repeatability, allowing the Pro2’s ram to stay
parallel, even in cases where the pressing load is
not in the center of the bed.
Programmable Tilt: Bring the ram
down in a slightly tilted condition for fade-out
work with the Pro2. Just program the ram to its
desired tilt. The ram will form the part in the
tilted condition and return to parallel at the end
of each stroke.
Productivity & Scalability: Use
sectional precision tooling and hydraulic clamping,
and turn your press brake into a highly productive
bending center for short run production.
Today’s safety equipment allows your press brake
to be more productive. Operators can stage bend
parts quickly without letting go of the part by
integrating point-of-operation guarding.
Economics: The Pro2 is an
economical machine with features normally seen on
high end, expensive brakes…and with Piranha’s
scalability, you can purchase only those features
that offer you a fast return on your investment.
