PII 35 Piranha Dual Operator Ironworker

Click For Ironworker & Single End Punch Brochure

IRONWORKERS

The Piranha Model PII-35 is a complete 5-station fabrication center with dual-slide controls for the punch station and shear/coper stations. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling.

STANDARD FEATURES:

	Complete Punching Attachment with stripper
	Electric Punch End Control including Remote Foot Switch & Limit Switch
	Manual Shear and Coper Control
	Set of Round Bar Knives [2 way] (customers choice to 1-3/8")
	Set of 10" Plate Shear Knives [4 way]
	Set of 13" Plate Shear Knives [4 way] (instead of Round Bar Knives and 10" Plate Shear Knives)
	Set of Angle Shear Knives [8 way top] [4 way bottom]
	Extra Oil Filter
	Coupling Wrench & 3/8" Allen Wrench
	Intergral Lifting Lug for instant portability

CAPACITIES & SPECIFICATIONS: MODEL PII-35 35 TON
Throat Depth	7"	Open Height	10"
Closed Height w/o Die Block	7-1/4"	Work Stations From Floor	40"
Hydraulics: Pump GPM System R/V PSI	4.4 3500	Stroke Length	4-1/4"
Bar Shear: Round(Min. to Max.) Square (Min. to Max.)	Optional 1/4" to 1-3/8" 1/2" to 1"	Motor STD. 230/460 1800 rpm Opt. Phase and Voltage On Request	5 HP 3 Phase
Punch: Max. Material Max. Hole *Special Tool Platen Table Size (D-W)	35 Tons 13/16" thru 1/2" *3-1/2" thru 1/8" 11" x 21-1/4"	Coper-Notcher (Tons) (Mat.)	40 2-14" x 3" x 1/4"
Dimensions (NET) W-L-H	23"x62"x63"	Plate Shear	13" Long 5/8" x 6" 1/2" x 8" 1/4" x 13"
Bending Attachment	35 Tons	Weight (NET) lbs	2600
Strokes Per Minute	28 @ 1"	Angle Shear (Max.)	3-1/2" x 3-1/2" x 5/16"

Piranha Ironworker & Punch Information Request Form :

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
State	Zip
E-mail
Phone