Box forming die
sets are used to form a pan, box, or
similar part that requires the four
sides to be bent up. The punch must be
high enough so that when the last two
bends are made the preformed sides will
not stroke the ram. The minimum punch
height is shown for various box depths
for forming 90° bends.
B-2 Box Forming Die Set
Box forming die
sets are used to form a pan, box, or
similar part that requires the four
sides to be bent up. The punch must be
high enough so that when the last two
bends are made the preformed sides will
not stroke the ram. The minimum punch
height is shown for various box depths
for forming 90° bends. Tipping the
included angle of the die set allows for
a deeper box to be formed and is limited
to 18 gauge and lighter material.
R-K Press
Brakes Dies
Information Request Form :
Select the items that
apply, and then let us know how to
contact you.
Send product literature
Send company literature
Have a salesperson contact me
Name
Title
Company
Address
State
Zip
E-mail
Phone
Copyright [2005] [Diamond Machinery Company]. All rights reserved
