|
U-2 Punch |
|
 |
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend. The
U-2 punch is used to form longer return
bends; in addition the width of the U-2
punch is narrowed to form a short
flange.
 |
Punches and dies are available from
stock. |
|
Can be
used for air bending or bottom
bending. |
|
Can be
modified to a special angle or radius.
|
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change.
|
|
|
DIES |
|
|
L-2 Die |
L-3 Die |
L-4 Die |
L-5 Die
|
| |
|
|
|
|
|
|
|
U-3 Punch |
|
 |
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend. The
U-2 punch is used to form longer return
bends; in addition the width of the U-2
punch is narrowed to form a short
flange.
|
Punches and dies are available from
stock. |
|
Can be
used for air bending or bottom
bending. |
|
Can be
modified to a special angle or radius.
|
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change.
|
|
|
|
DIES |
|
|
L-2 Die
|
L-3 Die
|
L-4 Die |
L-5 Die
|
L-6 Die
|
L-7 Die
|
L-8 Die
|
| |
|
|
|
|
|
|
|
|
|
|
U-4 Punch |
|
 |
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend. The
U-2 punch is used to form longer return
bends; in addition the width of the U-2
punch is narrowed to form a short
flange.
|
Punches and dies are available from
stock. |
|
Can be
used for air bending or bottom
bending. |
|
Can be
modified to a special angle or radius.
|
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change.
|
|
|
DIE |
|
|
L-9 Die |
|
|
U-5 Punch |
|
 |
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend. The
U-2 punch is used to form longer return
bends; in addition the width of the U-2
punch is narrowed to form a short
flange.
|
Punches and dies are available from
stock. |
|
Can be
used for air bending or bottom
bending. |
|
Can be
modified to a special angle or radius.
|
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change.
|
|
|
DIES |
|
|
L-10 Die
|
L-11 Die |
L-12 Die
|
| |
|
|
|
|
|
|
U-6 Punch |
|
 |
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend.
|
Punches and dies are available from
stock. |
|
Can be
used for air bending or bottom
bending. |
|
Can be
modified to a special angle or radius.
|
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change.
|
|
|
DIES |
|
|
L-13 Die
|
L-14 Die
|
| |
|
|
|
|
|
L-7 Die |
|
 |
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend.
|
Punches and dies are available from
stock. |
|
Can be
used for air bending or bottom
bending. |
|
Can be
modified to a special angle or radius.
|
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change.
|
|
|
DIE |
|
|
L-15 Die
|
|
