|
L-2 Die |
|
|
These punches and dies
are the most widely used to form
90-degree and greater bends. By
adjusting the ram, the depth of punch
travel can be regulated to produce the
desired angle of bend. The U-2 punch is
used to form longer return bends; in
addition the width of the U-2 punch is
narrowed to form a short flange.
 |
Punches and dies are available from
stock. |
|
Can be used for air bending or bottom
bending. |
|
Can be modified to a special angle or
radius. |
|
Can be sectionalized to fit your
needs. |
|
Dies are quick change. |
|
|
PUNCHES |
|
|
U-2 Punch |
U-3 Punch |
G-1 Punch
|
| |
|
|
|
|
|
|
L-3 Die |
|
|
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend. The
U-2 punch is used to form longer return
bends; in addition the width of the U-2
punch is narrowed to form a short
flange.
| Punches and
dies are available from stock.
|
| Can be used
for air bending or bottom bending.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-2 Punch |
U-3 Punch |
G-2 Punch
|
| |
|
|
|
|
|
|
L-4 Die |
|
|
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend. The
U-2 punch is used to form longer return
bends; in addition the width of the U-2
punch is narrowed to form a short
flange.
| Punches and
dies are available from stock.
|
| Can be used
for air bending or bottom bending.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-2 Punch |
U-3 Punch |
G-7 Punch
|
| |
|
|
|
|
|
|
L-5 Die |
|
|
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend. The
U-2 punch is used to form longer return
bends; in addition the width of the U-2
punch is narrowed to form a short
flange.
| Punches and
dies are available from stock.
|
| Can be used
for air bending or bottom bending.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-2 Punch |
U-3 Punch |
G-3 Punch
|
| |
|
|
|
|
|
|
L-6 Die |
|
|
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend.
| Punches and
dies are available from stock.
|
| Can be used
for air bending or bottom bending.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-3 Punch |
G-4 Punch |
G-8 Punch
|
| |
|
|
|
|
|
|
L-7 Die |
|
|
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend.
| Punches and
dies are available from stock.
|
| Can be used
for air bending or bottom bending.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-3 Punch |
G-4 Punch |
G-8 Punch
|
| |
|
|
|
|
|
|
L-8 Die |
|
|
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend.
| Punches and
dies are available from stock.
|
| Can be used
for air bending or bottom bending.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-3 Punch |
G-4 Punch |
G-8 Punch
|
| |
|
|
|
|
|
|
L-9 Die |
|
|
These
punches and dies are the most widely
used to form 90-degree and greater
bends. By adjusting the ram, the depth
of punch travel can be regulated to
produce the desired angle of bend.
| Punches and
dies are available from stock.
|
| Can be used
for air bending or bottom bending.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-4 Punch |
G-4 Punch |
G-8 Punch
|
| |
|
|
|
|
|
|
L-10 Die |
|
|
These
punches and dies are used for air
bending heavier gauges of material. Air
bending will minimize the press brake
load and material fracture.
| Punches and
dies are available from stock.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-5 Punch |
G-5 Punch |
G-9 Punch
|
| |
|
|
|
|
|
|
L-11 Die |
|
|
These
punches and dies are used for air
bending heavier gauges of material. Air
bending will minimize the press brake
load and material fracture.
| Punches and
dies are available from stock.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-5 Punch |
G-6 Punch |
G-9 Punch
|
| |
|
|
|
|
|
|
L-12 Die |
|
|
These
punches and dies are used for air
bending heavier gauges of material. Air
bending will minimize the press brake
load and material fracture.
| Punches and
dies are available from stock.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCHES |
|
|
U-5 Punch |
G-9 Punch
|
| |
|
|
|
|
|
L-13 Die |
|
|
These
punches and dies are used for air
bending heavier gauges of material. Air
bending will minimize the press brake
load and material fracture.
| Punches and
dies are available from stock.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCH |
|
|
U-6 Punch |
|
|
L-14 Die |
|
|
These
punches and dies are used for air
bending heavier gauges of material. Air
bending will minimize the press brake
load and material fracture.
| Punches and
dies are available from stock.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCH |
|
|
U-6 Punch |
|
|
L-15
Die |
|
|
These
punches and dies are used for air
bending heavier gauges of material. Air
bending will minimize the press brake
load and material fracture.
| Punches and
dies are available from stock.
|
| Can be
modified to a special angle or radius.
|
| Can be
sectionalized to fit your needs.
|
| Dies are
quick change. |
|
|
PUNCH |
|
|
U-7 Punch |
|
