|
UA-1 Acute Punch |
|
 |
These
punches and dies are the most universal
type press brake dies. They are ideal
for the first step in a hemming
operation furthermore they can be used
to air bend any angle greater then
30-degrees. Finished theses dies with a
flat top gives greater strength to the
die and allows for additional surface
hardening when forming abrasive
materials like rod or wire.
 |
Punches and dies are available from
stock. |
|
Used
to form first operation of a hem.
|
|
Can be
used for air bending angles greater
than 30-degrees. |
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change. |
|
|
DIES |
|
|
LA-1 Acute Die |
LA-2 Acute Die |
LA-3 Acute Die |
| |
|
|
|
|
|
|
UA-2 Acute Punch |
|
 |
These
punches and dies are the most universal
type press brake dies. They are ideal
for the first step in a hemming
operation furthermore they can be used
to air bend any angle greater then
30-degrees. Finished theses dies with a
flat top gives greater strength to the
die and allows for additional surface
hardening when forming abrasive
materials like rod or wire.
|
Punches and dies are available from
stock. |
|
Used
to form first operation of a hem.
|
|
Can be
used for air bending angles greater
than 30-degrees. |
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change. |
|
|
DIES |
|
|
LA-4 Acute Die
|
|
|
UA-3 Acute Punch |
|
 |
These
punches and dies are the most universal
type press brake dies. They are ideal
for the first step in a hemming
operation furthermore they can be used
to air bend any angle greater then
30-degrees. Finished theses dies with a
flat top gives greater strength to the
die and allows for additional surface
hardening when forming abrasive
materials like rod or wire.
|
Punches and dies are available from
stock. |
|
Used
to form first operation of a hem.
|
|
Can be
used for air bending angles greater
than 30-degrees. |
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change. |
|
|
DIE |
|
|
LA-5 Acute Die |
|
|
UA-4 Acute Punch |
|
 |
These
punches and dies are the most universal
type press brake dies. They are ideal
for the first step in a hemming
operation furthermore they can be used
to air bend any angle greater then
30-degrees. Finished theses dies with a
flat top gives greater strength to the
die and allows for additional surface
hardening when forming abrasive
materials like rod or wire.
|
Punches and dies are available from
stock. |
|
Used
to form first operation of a hem.
|
|
Can be
used for air bending angles greater
than 30-degrees. |
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change. |
|
|
DIES |
|
|
LA-6 Acute Die
|
LA-7 Acute Die |
| |
|
|
|
|
|
UA-5 Acute Punch |
|
 |
These
punches and dies are the most universal
type press brake dies. They are ideal
for the first step in a hemming
operation furthermore they can be used
to air bend any angle greater then
30-degrees. Finished theses dies with a
flat top gives greater strength to the
die and allows for additional surface
hardening when forming abrasive
materials like rod or wire.
|
Punches and dies are available from
stock. |
|
Used
to form first operation of a hem.
|
|
Can be
used for air bending angles greater
than 30-degrees. |
|
Can be
sectionalized to fit your needs.
|
|
Punches are quick change. |
|
|
DIES |
|
|
LA-8 Acute Die
|
|
