Home Contact FeedBack Site Map Caculators
 
30 Degree Dies
 
About us
Piranha
Hankwang Lasers
Pivatic
Komatsu
W.A. Whitney
R-K Press Brake Dies
Baleigh Industrial
Bertsch
Automec
Wila Tooling
Used Machinery
 
 
 
 

 
 
 
LA-1 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.
PUNCH  
UA-1 Punch
LA-2 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.

PUNCH

  
UA-1 Punch
LA-3 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.

PUNCH

  
UA-1 Punch
LA-4 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.

PUNCH

  
UA-2 Punch
LA-5 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.

PUNCHES

  
UA-3 Punch
LA-6 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.

PUNCH

  
UA-4 Punch
LA-7 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.

PUNCH

  
UA-4 Punch
LA-8 Die
These punches and dies are the most universal type press brake dies. They are ideal for the first step in a hemming operation furthermore they can be used to air bend any angle greater then 30-degrees. Finished theses dies with a flat top gives greater strength to the die and allows for additional surface hardening when forming abrasive materials like rod or wire.
bulletPunches and dies are available from stock.
bulletUsed to form first operation of a hem.
bulletCan be used for air bending angles greater than 30-degrees.
bulletCan be sectionalized to fit your needs.
bulletDies are quick change.

PUNCH

  
UA-5 Punch
 

 

R-K Press Brakes Dies Information Request Form :

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
State Zip
E-mail
Phone

   

 		  
 

Back Next
 
Copyright [2005] [Diamond Machinery Company]. All rights reserved